MK Fire

MK Fire Ltd
70 Alston Drive, Bradwell Abbey, Milton Keynes, Bucks, MK13 9HG

Freephone: 0800 371514
Tel: 01908 310800
Fax: 01908 220778
Email: info@mkfire.co.uk

Other Offices
Contact Us
Job Vacancies

Search the Site


If you have any comments about our site we would be pleased to hear from you. Please complete our comments form.


Disclaimer - Inclusion or exclusion of any recognized company or product name in no way reflects on the qualities, either positive or negative, of that named or any associations with it.
Fire Extinguishers
Hose Reels - fixed, swinging and recessed
Maximum hose lengths: Fixed: Swinging; Recessed:
19mm 30mm 30mm 30mm
25mm 30mm 30mm -

A range of slim line manual and automatic reels designed for reliability, performance and ease of installation and maintenance.
  • Accommodates 30m of 25mm or 19mm bore hose
  • Manufactured from zinc plated steel for corrosion protection
  • Epoxy polyester powder coated for a high quality finish
  • Jet spray nozzle included with all models
  • "Bolt and spacer" design allows reel to be opened up for servicing
  • Technical datasheets with performance specification available
  • Beaded hose guides on fixed reels allows hose to be drawn out easily in any direction
  • Gate valves supplied separately
  • Flexible water inlets for fixed manual reels supplied separately
  • Swinging and recessed no longer require water inlet pipe. This design allows pipe work to be plumbed direct into arm. Use of a blanking plug allows for top or bottom entry for right or left hand applications
  • Key holed bracket (supplied with fixed reels) allows 'one man' installation
Fixed Hose Reel
Hose reel type - Fixed:
19mm manual
25mm manual
19mm automatic
25mm automatic
Swinging Hose Reels
Hose reel type - Swinging:
19mm manual
25mm manual
19mm automatic
25mm automatic
Recessed Hose Reel
Hose reel type - Swinging:
19mm manual
19mm automatic
Hose Reel Accessories - flexible water inlet and gate valve
Description:
19mm flexible water inlet
25mm flexible water inlet
19mm gate valve
25mm gate valve
Hose Reel Accessories - universal back plate
Designed to convert many existing drill holes to accept the TG hose reel wall bracket, removing the need for time consuming drilling when replacing an old hose reel with a TG reel.

Suitable for converting from 52 Series - Thomas Glover, Pyrene, Angus, Noha, Gendus and H Roberts hose reels.
  • Manufactured from 12swg mild steel
  • Powder coated Post Office Red
  • Pre-drilled to fit onto existing bolts
  • M8 CSK screws welded into position for the standard TG bracket
  • Overall sizes 250mm x 250mm x 2.5mm (HxWxD)
Hose Reel Accessories - pedestal for floor mounted reels
  • Manufactured from 5mm thick steel plate
  • Epoxy polyester powder stove paint - Post Office Red
  • Will accommodate fixed, swinging or recessed hose reels
Hose Reel Accessories - nozzles
Performance: EN671 requirement: TG nozzle*:
Jet or spray: Spray: Jet: Spray:
Flow rate 2 bar 4 bar 2 bar 2 bar 4 bar 2 bar 4 bar
litres/minutes 24 34 - 20 30 25 40
Discharge throw, meters 10 - 3 10 12 4.5 7
Hose Reel Spares
Description:
TG nozzle 19mm
TG nozzle 25mm
Chrome plated nozzle 19mm
Chrome plated nozzle 25mm
Pyrene nozzle 19mm
Pyrene nozzle 25mm
Cooperspray nozzle 19mm
Cooperspray nozzle 25mm
Gate valve 19mm
Gate valve 25mm
Hoseguide
Instruction plate - auto reel
Instruction plate - manual reel
Jubilee clip 19mm
Jubilee clip 25mm
Hose Reel Tubing - BS 3169 APPROVED
Genuine high quality hose reel tubing approved to BS 3169. Thermoplastic covered for use on hose reels for fixed installations. The standard applies exclusively to delivery hose intended for use at ambient conditions in non-aggressive atmospheres within the temperature range -20°C to +60°C.

Description:
19mm X 30m
19mm X 35m
19mm X 45m
25mm X 30m
25mm X 35m
Hose Reel Tubing - prEN 694 APPROVED
A high quality hose reel tubing approved to prEN 694. Hoses complying with this standard are intended for applications where long intervals can occur between the occasions of use, e.g.. on fixed fire hose reels in buildings and other construction works. The standard applies exclusively to delivery hoses intended for use at ambient conditions in non-aggressive atmospheres within the temperature range of -20°C to +60°C.

Technical Specification:
Design working pressure (bar) 12
Proof pressure (bar) 24
Burst pressure (bar) 42

Description:
19mm X 30m to prEn 694
19mm X 35m to prEn 694
19mm X 45m to prEn 694
25mm X 30m to prEn 694
25mm X 30m to prEn 694


The products supplied may differ from those shown. Check when ordering to ensure the products meet with your requirements